Tata smoking exhaust Coating metal parts
Motor oil is a lubricant used in internal combustion engines, which power cars, motorcycles, lawnmowers, engine-generators, and many other machines. In engines, there are parts which move against each other, and the friction wastes otherwise useful power by converting the kinetic energy to heat. It also wears away those parts, which could lead to lower efficiency and degradation of the engine. This increases fuel consumption, decreases power output, and can lead to engine failure.
Lubricating oil creates a separating film between surfaces of adjacent moving parts to minimize direct contact between them, decreasing heat caused by friction and reducing wear, thus protecting the engine. In use, motor oil transfers heat through convection as it flows through the engine by means of air flow over the surface of the oil pan, an oil cooler and through the buildup of oil gases evacuated by the Positive Crankcase Ventilation (PCV) system.
In petrol (gasoline) engines, the top piston ring can expose the motor oil to temperatures of 160 °C (320 °F). In diesel engines the top ring can expose the oil to temperatures over 315 °C (600 °F). Motor oils with higher viscosity indices thin less at these higher temperatures.
Coating metal parts with oil also keeps them from being exposed to oxygen, inhibiting oxidation at elevated operating temperatures preventing rust or corrosion. Corrosion inhibitors may also be added to the motor oil. Many motor oils also have detergents and dispersants added to help keep the engine clean and minimize oil sludge build-up. The oil is able to trap soot from combustion in itself, rather than leaving it deposited on the internal surfaces. It is a combination of this, and some singeing that turns used oil black after some running.
Rubbing of metal engine parts inevitably produces some microscopic metallic particles from the wearing of the surfaces. Such particles could circulate in the oil and grind against moving parts, causing wear. Because particles accumulate in the oil, it is typically circulated through an oil filter to remove harmful particles. An oil pump, a vane or gear pump powered by the engine, pumps the oil throughout the engine, including the oil filter. Oil filters can be a full flow or bypass type.
Źródło: https://en.wikipedia.org/wiki/Motor_oil
Standard maintenance services
With the increasing number of cars is also increasing demand for services such as servicing cars. During the maintenance staff of people working on this, that our car was comprehensively tested in every respect. Even the slightest defect can in fact cause considerable danger on the road. The most common services they perform service technicians working in garages are primarily replacement car parts and ongoing maintenance. Sometimes there is a need to leave the car for a few days in the workshop in order to accurately and precisely mount the data elements or remedy the fault. In such cases, we can often expect us to provide transport from the service centers.
Which parts of the car are the most sought after by car owners?
Once you reach the most automotive parts, car owners? As it turns out, depending on the car model and age there are different needs. Of course, there is also a lot of auto parts that are purchased by all drivers, regardless of the purchased car. Such parts include, inter alia, season tires, wiper accessory which can quickly wear and other similar elements. Depending on the needs of the driver can also invest in tuning parts for cars and installing a few such elements will make our car will become a specific character. Popular, such as auto parts, which can increase the comfort of the passenger.